Net replacement film, also referred to as barrel tape, tends to be less flexible than the standard net wrap. This means that the net is held much tighter, making it much more difficult for air to permeate. Additionally, the wrapping process means that there are typically more than nine layers of plastic on the net, which makes it even harder for air to permeate.
A major benefit of using this type of film in place of netting is that it has higher structural integrity than other forms of cover. In addition to protecting from moisture and sun, it also has excellent thermal qualities, resisting impact, abrasion and rust. When purchasing quality silage, the nets used must be treated with a polyurethane protective layer to prevent degradation caused by exposure to moisture and light. These protective coatings also improve the chemical resistance of the film, meaning that the net replacement film can stand up against more types of chemicals than with any other type of covering. It also helps to improve the stability of the product, meaning that it will not easily break or tear.
As a method of baling, net replacement film is frequently applied to a variety of different surfaces. The most common areas include the face, back and underside of leaves, branches, trees and stumps, as well as some types of wood. However, it can be applied to any surface, as long as it meets specific requirements. For example, it’s often applied to match the colour of the foliage surrounding a tree or to match the colour of the bark on a dead tree. The net wrap can also be used to cover metal fences or posts. It can also be used to conceal drainage systems, prevent snow from melting on sidewalks and driveways, and from holding up paving and landscaping material without blocking foot traffic.
Like all types of film, net replacement wrap comes in two basic forms. The first type is an open-cell foam, which means that the protective layers are arranged in a series. The second type of bale wrap is closed-cell, which means that the protective layers are packaged in closed-cell construction, so they can’t be seen, but are well-worn. Both of these types of bales can be applied to a wide variety of outdoor surfaces, although some conditions need to be met for them to be effective. For example, an open-cell bale must be packed in a tightly-woven pile, while closed-cell varieties need to be rolled up tightly.
Net replacement film has several advantages over other materials, including fibreglass and aluminium. For one thing, it’s lightweight, which makes it easy to toss into the back of a pickup truck, and which also makes it easier to tie down to the ground when the truck is parked. It’s also resistant to sunlight, which means it won’t fade over time as some other fabrics do. The net wraps around curves and shapes and can be applied to curved surfaces like those found on light poles. It’s also resistant to acid and flame, which means it’ll stand up to graffiti, oil, grease, and even corrosion from the sun and rain.
One of the downsides to using plastic film is its susceptibility to breaking. In fact, this may be why bales were originally used as landfill; the materials would break down quickly if not properly stored. Net replacement films, in contrast, are made of a more durable type of fabric and will not break down as easily.